It shows that the editor of the membrane structure is stumped by the sudden problem. What kind of problem is it? Are you curious too? Question: Where do we need to reduce the wrinkles of the membrane structure? Come learn and understand this knowledge today!
The membrane structure can be applied in many fields mainly due to the architectural characteristics of the membrane structure itself. Membrane structure is divided into skeleton type membrane structure, tension type membrane structure, and inflatable membrane structure according to the structural form. No matter which form, the structure can be eclectic. However, we often encounter wrinkles on the membrane surface of the completed membrane structure, which seriously affects the aesthetics of the membrane structure. So where do we need to reduce film wrinkles?
1. Reduce film wrinkles from the aspect of material selection
Different materials determine the nature of the material. When designing the plan, we need to consider the mechanical properties of the material to make the material meet the design requirements without deforming or damaging the structure.
2. Reduce film wrinkles in terms of structural processing
Structural processing is mainly divided into support structure processing and membrane surface processing, (which is what we usually call steel and membrane surface processing) processing steps, we will not go into details here.
5. Reduce film wrinkles from the aspect of rigging processing
Collect technical data, calculate the processing length of the rigging and compile its processing process. The procurement plan and production operation plan are prepared according to the engineering materials. The purchased raw materials must have product qualification certificates, and the quality inspection department shall sample the raw materials for re-inspection. Corresponding tests should be carried out on the steel wire rope before production and processing to test whether it has stable tensile strength and elastic modulus, and meets the relevant standards in order to grasp the properties of the material. The processing of the rigging should ensure its accuracy requirements, that is, the initial stretching should be tried before production to ensure that the design requirements are met, and the trial pulling should be tried after processing to ensure the quality requirements.
6. Reduce membrane wrinkles from structural installation
The structural installation is mainly the installation of the supporting structure and the installation of the membrane surface. The installation steps are as follows: check the size of the steel frame-welded joints-ground spreading film connection accessories-reversed diaphragm-hoisting-opening the diaphragm-tensioning-positioning- Adjustment.
The original text is compiled from Shanghai Shows A Membrane Structure Co., Ltd.
Please specify
沪公网安备 31011802003675号